2019–2022 Ram 6.7L Cummins VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested 2019–2022 Ram 6.7L Cummins datalogs.
Platform help
HP Tuners
MPVI, RTD, TDN, reading, flashing, logging, credits, and troubleshooting.
Help topics
Getting Started With HP Tuners
Prepare TDN and a supported MPVI or RTD interface for The Tune Shop remote-tuning workflow.
Read articleUsing the TDN App
Use TDN to connect your interface, exchange files with The Tune Shop, flash tunes, and send logs.
Read articleConnecting an MPVI Device
Connect an MPVI2, MPVI2+, MPVI3, or MPVI4 for the supported customer workflow.
Read articleConnecting an RTD Device
Set up an RTD device for remote tune delivery through TDN.
Read articleReading Your Vehicle With TDN
Create and synchronize the vehicle read requested by The Tune Shop.
Read articleInstalling Your Tune With TDN
Synchronize and safely write the correct Tune Shop file to the vehicle.
Read articleHP Tuners Credits & Licensing
Understand vehicle/controller licensing without confusing credits with the tune service.
Read articleRecord a Datalog With HP Tuners VCM Scanner
Use the channel file and test conditions requested by The Tune Shop to record a focused VCM Scanner datalog.
Read articleHP Tuners Switch-On-The-Fly Guidance
Find the supplied operating guide for a supported HP Tuners switch-on-the-fly calibration.
Read articleHP Tuners T87A / T93 Installation Guidance
Use the supplied HP Tuners installation steps for supported T87A and T93 transmission-controller workflows.
Read articleNo matching help topics were found.
Supporting files
Downloads & resources
Channel / PID files
Ford 6.7L Power Stroke VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested Ford 6.7L Power Stroke datalogs.
5.9L Cummins VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested 5.9L Cummins datalogs.
Early 6.7L Cummins VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested early 6.7L Cummins datalogs.
L5P Duramax VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration containing the PIDs used by The Tune Shop for requested L5P datalogs.
LML Duramax VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration containing the PIDs used by The Tune Shop for requested LML datalogs.
Instructions
HP Tuners Switch-On-The-Fly Instructions
The Tune Shop instructions for operating a supported HP Tuners switch-on-the-fly calibration.
HP Tuners VCM Scanner Datalogging Instructions
The Tune Shop instructions for recording and saving a requested datalog with HP Tuners VCM Scanner.
HP Tuners Calibration Installation Instructions
The Tune Shop instructions for opening and writing a supplied calibration with HP Tuners VCM Suite.
HP Tuners MPVI3 Read and InfoLog Instructions
The Tune Shop instructions for reading a vehicle and collecting an InfoLog with an HP Tuners MPVI3 interface.
HP Tuners T87A / T93 Installation Steps
HP Tuners installation steps for supported T87A and T93 transmission-controller workflows.
Reference material
HP Tuners Cummins Switch-On-The-Fly User Guide
HP Tuners reference guide for supported Cummins switch-on-the-fly operation.
No matching help topics or resources were found.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Getting Started With HP Tuners
Prepare TDN and a supported MPVI or RTD interface for The Tune Shop remote-tuning workflow.
What you'll need
TDN is available for supported Apple iOS and Android devices. Interface and mobile-platform features vary by device generation; follow the prompts shown for your specific interface. MPVI devices support broader VCM Suite workflows, while RTD devices are intended primarily for remote tune delivery.
Step-by-step instructions
- Install TDN from the official app store.
- Create or sign in to your HP Tuners account.
- Connect the supported interface to the vehicle OBD-II port.
- Enable Bluetooth and grant requested permissions.
- Open TDN and complete MPVI/RTD Setup.
- Connect with The Tune Shop using the invitation or tuner details supplied with your order.
- Read the vehicle if requested, then keep TDN online long enough to sync the file.
- When your tune arrives, sync files, select the correct vehicle and tune, and follow every ignition prompt.
- Record and send a datalog if The Tune Shop requests one.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Using the TDN App
Use TDN to connect your interface, exchange files with The Tune Shop, flash tunes, and send logs.
What you'll need
TDN is the customer-facing Tune Delivery Network app. Use Tools for interface setup, permissions, resync, firmware/resource updates, verification codes, and support infologs. Feature availability can differ between iOS, Android, and interface generations.
Step-by-step instructions
- Install TDN and sign in.
- Allow Bluetooth and other requested app permissions.
- Power the interface by USB or from the vehicle and run Tools > MPVI/RTD Setup.
- Accept The Tune Shop connection supplied with your order.
- Use FLASH to select the vehicle and synchronize available files.
- Use the requested read, write, or logging workflow.
- Send logs and diagnostic information from TDN when requested.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Connecting an MPVI Device
Connect an MPVI2, MPVI2+, MPVI3, or MPVI4 for the supported customer workflow.
What you'll need
Connect vehicle OBD-II to the MPVI, then use the supported USB or wireless connection for your device and workflow. Older MPVI generations and current MPVI4 do not share every phone, wireless, or standalone feature, so use TDN setup and official documentation for the exact interface.
Step-by-step instructions
- Park safely and turn accessories off.
- Connect the interface firmly to the OBD-II port.
- Set ignition to the position requested by TDN without starting the engine.
- Enable Bluetooth and open TDN.
- Choose Tools > MPVI/RTD Setup and select the detected device.
- Complete firmware or resource updates before starting a vehicle operation.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Connecting an RTD Device
Set up an RTD device for remote tune delivery through TDN.
What you'll need
RTD devices are designed for remote tuning: The Tune Shop prepares the tune and TDN exchanges the customer read, tune files, and logs. Supported RTD generations and mobile features differ; the current TDN guide is centered on RTD4.
Step-by-step instructions
- Connect the RTD firmly to the OBD-II port.
- Turn ignition on only when TDN requests it; keep the engine off.
- Enable Bluetooth and complete MPVI/RTD Setup.
- Connect to The Tune Shop using the supplied tuner invitation.
- Read, sync, write, and log only the files for the selected vehicle.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Reading Your Vehicle With TDN
Create and synchronize the vehicle read requested by The Tune Shop.
What you'll need
A read captures supported controller information for tune preparation. Availability and duration vary by vehicle and controller.
Step-by-step instructions
- Connect a battery maintainer when appropriate and charge the mobile device.
- Confirm reliable Internet, Bluetooth, and the correct interface connection.
- Open TDN, select FLASH, and select the vehicle.
- Choose the read option shown for the vehicle and follow the ignition prompt.
- Start the read and keep the phone close to the interface.
- Wait for completion and allow TDN to upload/sync the read.
- Notify The Tune Shop after the read is available.
Related download
HP Tuners MPVI3 Read and InfoLog Instructions
The Tune Shop instructions for reading a vehicle and collecting an InfoLog with an HP Tuners MPVI3 interface.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Installing Your Tune With TDN
Synchronize and safely write the correct Tune Shop file to the vehicle.
What you'll need
Tune files sent by The Tune Shop should appear automatically. Use Sync Files if a new file is missing or lacks the downloaded indicator. A file beginning Read- cannot be flashed; after server processing, a restorable read is labeled Restore-.
Step-by-step instructions
- Verify vehicle and phone battery condition, Internet, Bluetooth, and interface connection.
- Tap FLASH and select the correct vehicle.
- Tap Sync Files if the Tune Shop file is not ready locally.
- Select the intended tune and review its details.
- Tap WRITE VEHICLE.
- Connect the interface and set ignition ON with engine OFF when prompted.
- Begin the write and wait without disconnecting anything.
- Follow all key-cycle prompts and start the engine only when instructed.
Related download
HP Tuners Calibration Installation Instructions
The Tune Shop instructions for opening and writing a supplied calibration with HP Tuners VCM Suite.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
HP Tuners Credits & Licensing
Understand vehicle/controller licensing without confusing credits with the tune service.
What you'll need
Credits are HP Tuners licensing units used to license supported vehicles or controllers to an interface. They are not a tune file or tuning service. Requirements vary by application and may increase when additional controllers are included. The applicable Tune Shop product page and checkout selection are authoritative for quantity.
Step-by-step instructions
- Review the product requirements before checkout.
- Purchase the required credits with your Tune Shop order when offered.
- Keep TDN online and use Tools > Resync if recently purchased credits are not visible.
- Contact support before buying more credits if licensing does not match the product page.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
Record a Datalog With HP Tuners VCM Scanner
Use the channel file and test conditions requested by The Tune Shop to record a focused VCM Scanner datalog.
What you'll need
Have a Windows computer with VCM Scanner, a supported HP Tuners interface, and the correct vehicle-specific channel file when one is supplied. The channel file selects the parameters The Tune Shop needs; do not modify the downloaded XML file.
Step-by-step instructions
- Download the channel file that matches the vehicle or application.
- Open VCM Scanner and load the supplied channel configuration.
- Connect the HP Tuners interface and confirm vehicle communication.
- Start recording only when it is safe to perform the requested test.
- Capture the operating condition requested by The Tune Shop.
- Stop and save the log with a clear filename.
- Upload the saved log to the existing The Tune Shop support request.
Related download
2019–2022 Ram 6.7L Cummins VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested 2019–2022 Ram 6.7L Cummins datalogs.
Ford 6.7L Power Stroke VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested Ford 6.7L Power Stroke datalogs.
5.9L Cummins VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested 5.9L Cummins datalogs.
Early 6.7L Cummins VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration for requested early 6.7L Cummins datalogs.
L5P Duramax VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration containing the PIDs used by The Tune Shop for requested L5P datalogs.
LML Duramax VCM Scanner Channel File
HP Tuners VCM Scanner channel configuration containing the PIDs used by The Tune Shop for requested LML datalogs.
HP Tuners VCM Scanner Datalogging Instructions
The Tune Shop instructions for recording and saving a requested datalog with HP Tuners VCM Scanner.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
HP Tuners Switch-On-The-Fly Guidance
Find the supplied operating guide for a supported HP Tuners switch-on-the-fly calibration.
What you'll need
Switch-on-the-fly controls and available tune slots depend on the vehicle, controller, and calibration supplied by The Tune Shop. Use the related resource that matches the application.
Step-by-step instructions
- Confirm the vehicle and calibration support switch-on-the-fly operation.
- Download the applicable guide below.
- Follow the control and slot-selection instructions supplied for the vehicle.
- Contact The Tune Shop before operating the vehicle if the guide does not match the installed calibration.
Related download
HP Tuners Switch-On-The-Fly Instructions
The Tune Shop instructions for operating a supported HP Tuners switch-on-the-fly calibration.
HP Tuners Cummins Switch-On-The-Fly User Guide
HP Tuners reference guide for supported Cummins switch-on-the-fly operation.
Help topics
Getting Started With HP Tuners
Using the TDN App
Connecting an MPVI Device
Connecting an RTD Device
Reading Your Vehicle With TDN
Installing Your Tune With TDN
HP Tuners Credits & Licensing
Record a Datalog With HP Tuners VCM Scanner
HP Tuners Switch-On-The-Fly Guidance
HP Tuners T87A / T93 Installation Guidance
HP Tuners
HP Tuners T87A / T93 Installation Guidance
Use the supplied HP Tuners installation steps for supported T87A and T93 transmission-controller workflows.
What you'll need
This controller-specific resource is intended only for supported T87A or T93 applications. Confirm controller compatibility and required services before beginning.
Step-by-step instructions
- Confirm the vehicle uses a supported T87A or T93 controller.
- Download and review the related installation guide.
- Complete the controller-specific preparation exactly as directed.
- Contact The Tune Shop if the vehicle, controller, or service shown does not match the order.
Related download
HP Tuners T87A / T93 Installation Steps
HP Tuners installation steps for supported T87A and T93 transmission-controller workflows.
Customer support
Still need help?
Have your order number, vehicle information, tuning device, and a screenshot of the error ready.